Metrological Engineering Quiz

Rate  of  wear  is  directly proportional   to  the  contact surface  area :-

Mandrel is always  centered :-

In meter rollers are laced at a distance of 751 mm:-

At what position a  smaller ball  is placed  in the  hole  to check  the  angle  of  a  tapered  hole :-

What does N,P and L mean in N.P.L. Gauge interferometer;-

Random errors in an measurement instrument are due to:-

In which  gauge  wear  takes place   more rapidly :-

Combination sets are used as simple ruler:-

What is the measuring speed in universal measuring instrument for error free reading:-

Side faces of V-blocks are not working surfaces:-

What is the tensile strength of blade of feeler gauge with thickness up to 0.5 mm:-

At which part  spirit  level  is  present  in the  clinometers ;-

The capacity of compressor  will be highest  when its intake temperature is:-

In gas turbine high thermal  efficiency is obtained in;-

Type  A uncertainties  very  each and every time  a  measurement is made ;-

Centrifugal pump is started with its delivery valve;-

What is the bearing area of V-block:-

Clinometer is  used for  checking  angular  faces ;-

Which is the first choice of  diameter   which  is indicated by IS ;-

Which  characterises  the dispersion of  the result obtained  in a series  of  measurement  of the same value of  a quantity  measured :-

The blades of gas  turbine are made of ;-

In a forced vortex , the velocity of flow  everywhere  within the fluid is:-

____________ instrument  provide  a digital  output :-

Which is used for  magnification purpose  in passmeter :-

Spontaneous combustion is a phenomenon in which  coal bursts into flame  without any external  ignition  source:-